RIA45 Operation
Endress+Hauser 17
Underrange/overrange:
In the dot matrix section, the error and channel name (TAG) are specified.
6.3.2 Icons in the editing mode
The following characters can be used to enter user-defined text:
‘0-9’, ‘a-z’, ‘A-Z’, ‘+’, ‘-’, ‘*’, ‘/’, ‘\’, ‘%’, ‘°’, ‘2’, ‘3’, ‘m’, ‘.’, ‘,’, ‘;’, ‘:’, ‘!’, ‘?’, ‘_’, ‘#’, ‘$’, ‘"’, ‘´’, ‘(’,
‘)’, ‘~’
For numerical entries, the numbers ‘0-9’ and the decimal point are available.
Furthermore, the following icons are used in the editing mode:
Symbol for the setup
Symbol for the Expert setup
Symbol for diagnostics
Accept entry.
If this icon is selected, the information entered is accepted at the position and the user exits the
editing mode.
Reject entry.
If this icon is selected, the information entered is rejected and the user exits the editing mode. The
text configured beforehand remains unchanged.
Move one position to the left.
If this icon is selected, the cursor moves one position to the left.
Delete back.
If this icon is selected, the character to the left of the cursor is deleted.
Delete all.
If this icon is selected, all the information entered is deleted.
6.4 Quick guide to the operating matrix
The following tables show all menus and the operating functions.
Display menu Description
AI1 Reset minmax* Reset the min/max values for Analog in 1
AI2 Reset minmax* Reset the min/max values for Analog in 2
CV1 Reset minmax* Reset the min/max values for Calc value 1
CV2 Reset minmax* Reset the min/max values for Calc value 2
Analog in 1 Display setting for Analog in 1
Analog in 2 Display setting for Analog in 2
Calc value 1 Display setting for Calc value 1
Calc value 2 Display setting for Calc value 2
Contrast Display contrast
Brightness Display brightness
Alternating time Switchover time between values chosen to be displayed
Back Return to main menu
*) Is only displayed if "Allow reset" = "Yes" is set in the "Expert" menu for the corresponding channel.
To Next Page
Loading...
