RIA45 Technical data
Endress+Hauser 53
13.8 Certificates and approvals
13.8.1 CE mark
The device meets the legal requirements of the EU directives. Endress+Hauser confirms
that the device has been tested successfully by affixing the CE mark.
13.8.2 Ex approval
Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by
your E+H Sales Center on request. All explosion protection data are given in a separate
documentation which is available upon request.
13.8.3 Other standards and guidelines
• IEC 60529:
Degrees of protection by housing (IP code)
• IEC 61010-1: 2001 cor 2003
Safety requirements for electrical equipment for measurement, control and laboratory
use
• EN 60079-11
Explosive atmospheres - Part 11: equipment protection by intrinsic safety "I"
13.8.4 Marine approval
Germanischer Lloyd (GL)
13.9 Documentation
• System Components and Data Managers - Solutions for the loop: FA00016K/09
• Technical Information Panel meter RIA45: TI00141R/09
• Ex Safety Instructions:
ATEX II(1)GD [Ex ia] IIC: XA00076R/09
• SIL Safety Manual:
SD00014R/09
To Next Page
Loading...
