Endress+Hauser ria45 - Analog Input Range Configuration

Appendix RIA45
58 Endress+Hauser
AI1/AI2 Lower range
Navigation

Setup → AI1 Lower range/AI2 Lower range
Description Configures the measuring range lower limit
User entry Numerical value
1)
Factory setting 0.0000
Additional information Only visible if → Diff pressure is configured as the application.
AI1/AI2 Upper range
Navigation

Setup → AI1 Upper range/AI2 Upper range
Description Configures the measuring range upper limit
User entry Numerical value
1)
Factory setting 100.00
Additional information Only visible if → Diff pressure is configured as the application.
CV factor
Navigation

Setup → CV factor
Description Factor by which the calculated value is multiplied.
User entry Numerical value
1)
Factory setting 1.0
Additional information Only visible if → Diff pressure is configured as the application.
CV unit
Navigation

Setup → CV unit
Description Unit of the calculated value
Options Customized text, max. 5 digits
Additional information Only visible if → Diff pressure is configured as the application.
CV Bar 0%
Navigation

Setup → CV Bar 0%
Description Configures the 0%-value for the bar graph
User entry Numerical value
1)
Factory setting 0.0000
Additional information Only visible if → Diff pressure is configured as the application.
CV Bar 100%
Navigation

Setup → CV Bar 100%
Description Configures the 100%-value for the bar graph
User entry Numerical value
1)