Endress+Hauser RMS 621 - Page 49

RMS 621 6 Commissioning
Endress+Hauser 49
Setup → Extras
Set-up of general unit data such as software version
Sub menu Setup (all parameters) Æ Extras
Setup → Service
Service menu. Setup (all Parameter) Æ Service
Function (Menu
address)
Parameter set-up Description
Prog. name The name that is saved, together with all settings, on the
ReadWin
®
2000 operating software.
SW Version Unit software version.
SW Option Information, which extension cards are installed.
CPU no. The unit CPU number operates as identification feature. This is
always saved together with all parameters.
Series no. Unit series number.
Run time
1. Unit
2. LCD
1. Information, how long the unit has been in operation
(protected by the service code).
2. Information for the unit display operating time (protected
by the service code.)
Function (Menu
address)
Parameter set-up Description
Service code
Preset In this address the unit can be rest to all factory default settings
(protected by the service code).
!
Note!
All setting made will be reset and therefore be null and void.
Counter stop Ye s
No
Counter reaction on wet steam alarm.
No: Counter is not influenced
Yes: Counter freezes until the steam condition stabalises
(=saturated steam)
Totalizer Sums application 1
Sums application 2
Sums application 3
Totalizer display.
!
Note!
Information for service: cannot be edited!