Endress+Hauser Soliwave FDR56 - Page 25

Soliwave FQR56/FDR56
Electrical connection
Endress+Hauser 25
6�3�2 Connection of F15 (stainless steel) and F34 (aluminium) housing
1
2
3
4
5
1
2
3
4
5
13 DeviceconnectionF15andF34housing
1 Connectionterminals
2 Potentialequalizationconnection
3 Cablegland
 (clampingarea7to10.5mm)
4 Connectioncable
5 Matingconnector(optionalwithprefabricatedconnectioncable)
Procedure of connection:
Tighten the cap nut (torque of up to 10 Nm).
Connect the power supply and signal output.
Connect the protective ground.
Procedure of connection with connectors:
Connect the protective ground.
Connecttheconnectorsandxthem.