Endress+Hauser SpectraSensors SS2100i-1 - Appendix A: Specifications; Table A-1 Sample Conditioning System (SCS) Specifications

SCS Overview Manual A–1
Appendix A: Specifications
Table A-1 Sample Conditioning System (SCS) Specifications
Applications
Environmental Temperature
Range
–20 C to +50C (–4F to +122 F) (SS2100i-1)
–10 C to +60C (+14 F to +140 F) (SS2100i-2)
Heated Enclosure Operating
Temperat ur e
50

C to 60

C (122

F to 140

F).
Not to exceed 60

C (140

F).
Environmental Relative
Humidity
5% to 95%, Non-condensing
Altitude Up to 2,000 m (6,550 feet)
Contaminant Sensitivity None for gas phase glycol, methanol, amines, or
mercaptans.
Electrical
SCS Heater Voltage
1
1. Supply voltage not to exceed 10% of nominal. Transient over-voltages according to
Over Voltage category II.
240 VAC 10%, 50 or 60 Hz
SCS Heater Power 200 W
Physical Specifications
Enclosure IP66, NEMA 4X, 304 or 316L stainless steel
Dimensions
2
2. Dimensions may vary. Consult the system drawings for your analyzer.
914 mm H x 610 mm W x 332 mm D
(36” H x 24” W x 12” D)
Weight Approximately 125 kg (275 lbs)
Certifications
Assembly Rating ___ Assembled using electrical components
certified for II 2 G, EX db IIB+H2 T3 Gb
IP66