SCS Overview Manual 1–1
1 - INTRODUCTION
This manual provides an overview of the sample conditioning system (SCS),
including components, operation and troubleshooting that may accompany an
SS2100i-1 or SS2100i-2 analyzer. Other manuals related to the operation,
installation and maintenance of the SS2100i-1 or SS2100i-2 analyzers may
include:
• SS2100-1 analyzer
– SS2100i-1 Analyzer Safety Manual (P/N 4900002260)
– SS2100i-1 Analyzer Hardware Installation and Maintenance
Manual (P/N 4900002222)
• SS2100-2 analyzer
– SS2100i-2 Analyzer Safety Manual (P/N 4900002259)
– SS2100i-2 Analyzer Hardware Installation and Maintenance
Manual (P/N 4900002224)
• Analyzer firmware
– Firmware FS 5.16 Operator’s Manual
– Firmware NS 5.14 Operator’s Manual
How to Use This Manual
This manual should be read and referenced by individuals responsible for
installing, operating or maintaining the analyzer and SCS.
Take a moment to familiarize yourself with this user manual by reading the
"Table of Contents".
There are a number of options and accessories available for the SCS. This
manual has been written to address the most common options and accessories
for a variety of analyte measurements. Images, tables and charts have been
included to provide a visual understanding of the SCS and its functions. Special
symbols are also used to provide the user with key information regarding the
system configuration and/or operation. Pay close attention to this information.
Who should read this manual
This manual should be read and referenced by anyone installing, operating or
having direct contact with the analyzer.
General Warnings and Cautions
Instructional icons are provided in this manual and on the SCS unit to alert the
user of potential hazards, important information and valuable tips. Following
are the symbols and associated warning and caution types to observe when
servicing the analyzer. Some of these symbols are provided for instructional
purposes only and are not labeled on the system.
To Next Page
Loading...
Need help?
General
