S o n o m a U s e r M a n u a l
64
C H A P T E R S E V E N
65
S o n o m a U s e r M a n u a l
H T T P S I N T E R F A C E
Firmware: Linux RFS Upgrade
This page is used for upgrading the Linux RFS rmware. You must be logged in as “root” in order to
have access to this page. The latest released versions of Sonoma rmware are freely available on the
EndRun Technologies website. For detailed information on how to perform the upgrade either via the
network port, the serial port, or the HTTPS interface see Appendix B - Upgrading The Firmware.
Firmware: Linux Kernel Upgrade
This page is used for upgrading the Linux Kernel rmware. You must be logged in as “root” in order
to have access to this page. The latest released versions of Sonoma rmware are freely available on
the EndRun Technologies website. For detailed information on how to perform the upgrade either via
the network port, the serial port, or the HTTPS interface see Appendix B - Upgrading The Firm-
ware.
Firmware: CDMA Subsystem Upgrade Page
This page is used for upgrading the rmware for the CDMA Subsystem. You must be logged in as
“root” in order to have access to these pages. The latest released versions of Sonoma rmware are
freely available on the EndRun Technologies website. For detailed information on how to perform
the upgrade either via the network port, the serial port, or the HTTPS interface see Appendix B - Up-
grading The Firmware.
Firmware: CDMA Receiver Upgrade Page
This page is used for upgrading the rmware for the CDMA Receiver. You must be logged in as
“root” in order to have access to these pages. The latest released versions of Sonoma rmware are
freely available on the EndRun Technologies website. For detailed information on how to perform
the upgrade either via the network port, the serial port, or the HTTPS interface see Appendix B - Up-
grading The Firmware.
Firmware: Reboot Page
This page will allow you to perform a software reboot of both the Linux Subsystem and the CDMA
Subsystem. This is normally used after a rmware upgrade but can be done anytime you wish to
reset the Sonoma.
Disable or
Restrict Access
To disable HTTPS, see Chapter 5 - Security, Disable SNMP, SSH and HTTPS. To restrict access to
specic hosts see Chapter 5 - Security, Restrict Access - HTTPS.
To Next Page
Loading...