EndRun Sonoma D12 - Time Code Output

S o n o m a U s e r M a n u a l
76
C H A P T E R N I N E
77
S o n o m a U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
Bit 3 Bit 2 Bit 1 Bit 0
Char 0 FLASH Writes FPGA
Conguration
CDMA Signal System Oscillator
DAC
Char 1 CDMA
Receiver
Subsystem
Communication
CDMA Reference
Time
CDMA Receiver
Communication
Char 2 System
Oscillator PLL
N/A Secondary
Power Supply
Primary
Power Supply
Char 3 System Power /
Conguration
N/A N/A N/A
The Sonoma response shown below is an example that shows TFOM=6, the time and date, the cur-
rent and future leap seconds are 16, the signal processor is locked, the CDMA channel is NAP_01_A,
the PNO is 369, the AGC is 197, the VCDAC is 28233, the EFCDAC is 346593, the signal-to-noise
ratio is 3.2 and the frame error rate is 0.049.
Command: cdmastat
Sonoma reply:
LOCKED TFOM = 6 2013 40 20:47:50 16 16 2 NAP_01_A 369 197 28233 346593 3.2 0.049
0000 0000
cdmaversion
This command displays the rmware and hardware versions of the CDMA Subsystem.
Command: cdmaversion
Sonoma reply:
F/W 6010-0071-000 Ver 0.50 - FPGA 6020-0012-000 Ver 01 - FEB 01 16:56:37 2013
cpuio (Optional)
See Chapter 10 - Options, CPU Module Options for information on this command.
cpuioconfig (Optional)
See Chapter 10 - Options, CPU Module Options for information on this command.
cpustat
This command shows a group of key values for monitoring the health of the Linux CPU and operat-
ing system status. The format is:
YYYYMMDD.HH:MM:SS LLL% FREEkB +TT.TC
Where:
YYYY is the year of the UTC timestamp of the most recent update.