EndRun Sonoma D12 - Available User Commands; Get_Sw_Opts

S o n o m a U s e r M a n u a l
70
C H A P T E R N I N E
71
S o n o m a U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
Available User Commands
COMMAND FUNCTION
accesscong Interactive script that guides you in conguring
telnet, ssh and snmpd access to the Sonoma that is limited
to specic hosts. The resulting /etc/hosts.allow and
/etc/hosts.deny les are saved to the non-volatile FLASH disk.
Factory default conguration allows access by all hosts.
caldelay Prints the calibration delay. See the setcaldelay command.
cdmachannelset Prints the current CDMA channelset being used. It can be
one of North American Cellular, South Korean Cellular, North
American PCS, Indian Cellular or Japanese Cellular. See the
setcdmachannelset command.
cdmaleapcong Guides the user in conguring the way in which UTC leap sec-
onds are handled: either automatically via CDMA basestation
transmissions or by user-entered current and future leap second
parameters. See the cdmaleapmode command.
cdmaleapmode Prints the current CDMA leap second mode of operation, either
automatic or user-entered. If user-entered, prints the current
and future leap second values. See the cdmaleapconfig
command.
cdmastat Prints the CDMA Subsystem status information to the console.
cdmaversion Prints the CDMA Subsystem rmware and FPGA version
information.
cpuio
(optional)
Returns the current settings for any installed, user-selectable,
CPU Module options. See Chapter 10 - Options, CPU Module
Options for more information.
cpuiocong
(optional)
An interactive utility that allows you to modify the settings
for the CPU Module options. See Chapter 10 - Options, CPU
Module Options for more information.
cpustat Prints the current Linux CPU core temperature, system load as
percent of maximum and free memory available.
faultstat Prints the summary of all system fault states in a user-friendly
format.
get_sw_opts Returns the current software options enabled in your Sonoma.
See Chapter 10 - Options, Software Options for more informa-
tion.
help
help command
Prints help list for all Sonoma-specic (not Linux) commands.
Prints command-specic help. For example: help cdmastat.
inetdcong Interactive script that allows you to congure the list of pro-
tocol servers which are started by the inetd server daemon
running in the Sonoma.
kernelversion Prints the Linux operating system kernel version.
kplockstat Prints the front-panel keypad lockout status.
See the lockoutkp and unlockkp commands.