0922001-J0 Rev A
6
User GuideCordex® CXPS-E105 Edge Power Systems
1. Safety
Save these instructions
This document contains important safety instructions that must be followed during the installation, servicing,
and maintenance of the product. Keep it in a safe place. Review the drawings and illustrations contained in
this document before proceeding. If there are any questions regarding the safe installation or operation of this
product, contact Alpha Technologies Ltd. or the nearest Cordex® power system representative.
1.1 Safety symbols
To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the following
symbols have been placed throughout this document. Where these symbols appear, use extra care and attention.
Symbol Type Description
Risk of serious injury or death
Equipment in operation poses a potential electrical
hazard which could result in serious injury or death to
personnel. This hazard may continue even when power is
disconnected.
Cautions indicate the potential for injury to personnel.
Risk of burns
A device in operation can reach temperature levels which
could cause burns.
The use of attention indicates specific regulatory or code
requirements that may aect the placement of equipment
or installation procedures. Follow the prescribed procedures
to avoid equipment damage or service interruption.
This symbol indicates the location or terminal intended for
the connection to protective earth. An enclosure that is not
properly connected to protective earth presents an electrical
hazard. Only a licensed electrician can connect AC power
and protective earth to the enclosure.
A notice provides additional information to help complete a
specific task or procedure or general information about the
product.
Operating instructions
WARNING
CAUTION
CAUTION
ATTENTION
GROUNDING
NOTICE
OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General