11g Wireless Client Bridge/AP Version 1.36
36
5.3.1.1 Static IP Address
.
IP Address: Enter the IP address.
Subnet Mask: Enter the subnet mask for the IP address.
Default Gateway: Enter the IP address for the default gateway.
DHCP: Since a static IP address is used, this option must be set to Disabled. If this
device is a DHCP client and will receive its IP settings from a DHCP server, then
select Enabled from the drop-down list. Enabling the DHCP client will disable the IP
address, subnet mask, and default gateway fields. If the DHCP option is Disabled,
then the IP address, subnet mask, and default gateway fields must be filled in.
802.1d Spanning Tree: Select Enabled from the drop-down list if you if you would
like to use the spanning tree feature.
Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
To Next Page
Loading...
