Engine LanDrive - Network Information; Service Information; Disk Information

11
Group Name – This is the name of your home network. The default value is WORKGROUP.
When you set up your network, Windows automatically creates a workgroup and gives it a
name.
Administrator – To change the administrator password, enter a new value here.
Date/Time – To change the date and time, enter the new values here. You can set both date
and time manually, adjust your time zone, and automatically adjust the internal clock for
Daylight Savings Time.
Firmware Version – Displays information about the current firmware.
Network Information
IP Address – Displays the IP address of the LanDrive
MAC Address – Displays the MAC address of the LanDrive
DHCP Server – Allows you to enable or disable the LanDrive’s DHCP server.
Service Information
SAMBA Service – Allows you to enable or disable the Samba server.
FTP Service – Allows you to enable or disable the FTP server.
Disk Information
Displays data about the hard drive, including the model, size, and free space.