26
FTP Server
File Transfer Protocol (FTP) is a network protocol used to transfer data from one computer
to another through a network, such as over the Internet.
FTP is a file transfer protocol for exchanging files over any TCP/IP based network to
manipulate files on another computer on that network regardless of which operating
systems are involved (if the computers permit FTP access).
Configuring an FTP Server
Connect to the LanDrive via HTTP and click on the FTP Server tab.
FTP Port – Enter the port number for the internal FTP server. You can enter a number
anywhere between 1024 and 65500, and the default port is 21. If you are behind a firewall,
remember to open the port you have selected.
FTP Codepage – Select one of the following depending on your locale:
To Next Page
Loading...