SQ-80 — Musician's Manual
MAKING A SONG
Lets suppose that you have recorded a number of Sequences, and that you now want to Create a Song
that consists of the following:
Step 1— Sequence 04 for 2 times through,
Step 2 — Sequence 05 for 1 time through,
Step 3 — Sequence 06 for 1 time through,
Step 4 — Sequence 08 for 2 times through,
Step 5 — Sequence 08, Transposed up a Fifth, for 2 times through,
Step 6 — Sequence 10 for 4 times through,
The Procedure is as follows:
1) Create a New Song
-> Select CREATE/ERASE Page, and press NEW SONG.
-> Name the new Song, as described on p. 109.
-> Press *YES*. You will automatically be placed on the SONG EDIT Page. (The SONG EDIT
Page is also reached from the EDIT Page by pressing SONG.) The Page comes up as follows:
STEP=01, TR=+00.
SEQ=01, REP=01,
2) Edit Step 1
− SEQ is already selected
(underlined). Move the Data Entry Slider or the Up and Down Arrow
Buttons until the Display reads SEQ=04.
--> Press REP. Adjust to REP=02.
3) Edit the Remaining Steps
Step 2:
____ > Press NEXT. The Display reads: STEP=02, TR=+00, SEQ=XX, REP=XX. SEQ is already
selected.
____ > Move the Data Entry Slider or the Up and Down Arrow Buttons until SEQ=05.
____ > Press REP. Adjust to REP=01,
Step 3:
− > Press NEXT. The Display reads: STEP=03, TR=+00, SEQ=XX,
REP=XX. > Move the Data Entry Slider or the Up and Down Arrow Buttons until
SEQ=06.
− > Press REP. Adjust to REP=01,
Step 4:
− > Press NEXT. The Display reads: STEP=04, TR=+00, SEQ=XX, REP=XX.
− > Move the Data Entry Slider or the Up and Down Arrow Buttons until SEQ=08.
− > Press REP. Adjust to REP=02.
Step 5:
> Press NEXT. The Display reads: STEP=05, TR=+00, SEQ=XX, REP=XX.
> Move the Data Entry Slider or the Up and Down Arrow Buttons until SEQ=08.
Press REP. Adjust to REP=02.
− Press TR=. Adjust to TR=+07. This will Transpose Sequence 06 up a Fifth (seven semitones)
during this Step.
138 Section 4 — The Sequencer
To Next Page
Loading...
