SQ-
8
0 — Musician's Manual
5. WAVE
Selects the Wave that the Oscillator will play from among the 75 available Waves. (See
WAVES, p. 30)
7. MOD # 1
Selects the first source of Modulation. The Modulators selected on this page affect only the pitch
of the Oscillator.
8. MOD # 1 DEPTH
Sets the depth, or amount, by which Modulator #1 will affect the pitch of the Oscillator. The
Modulation amount can be positive or negative.
Range:
-63 To + 63.
9. MOD # 2
Selects the second source of Modulation. The effects of Modulator #1 and Modulator #2 are
added together. You can thus double the maximum Modulation depth of a given modulator by
selecting the same source for Modulator #1 and Modulator #2. The Modulators selected on this
page affect only the pitch
of the Oscillator.
10. MOD # 2 DEPTH
Sets the depth, or amount, by which Modulator #2 will affect the pitch of the Oscillator. The
Modulation amount can be positive or negative.
Range:
-63 To + 63.
Section 3 — Voice Programming
49
To Next Page
Loading...
