ENSONIQ SQ-80 User Manual

SQ-80 — Musician's Manual
Selecting a Sequence
Press the buttons labeled SEQ 1
.
4, SEQ 2
.
5 or SEQ 3
.
6 to see the Sequence Select Pages for the firs
t
three Sequencer Banks numbered SEQ 1, SEQ 2 and SEQ 3. These Sequences are numbered 01 through
30. When you press SEQ 1
-
4, the Display shows:
Press the SEQ button again. Now pressing these same three Bank Select buttons will show you the
Sequence Select Pages for the next three Sequencer Banks, numbered SEQ 4, SEQ 5 and SEQ 6.
T
hese
Sequences are numbered 31 through 60.
Press SEQ again to return to the first three Sequence Select Pages. Repeated pressing of the SEQ button
w
ill toggle the Display back and forth between SEQ 1 and SEQ 4: between SEQ 2 and SEQ 5: between
SEQ 3 and SEQ 6: and between the two banks of Songs.
Pressing the "Soft" Button next to any of the ten Sequence Locations on a Page selects that as the curren
t
Sequence, Only those with (SEQ—) before the Sequence number can be selected. A location where
(XXX—) appears represents a Sequence which hasn't been defined yet — it contains no Sequence Data
and cannot be selected until you Create a Sequence in that Location. As with everything on the SQ-80.
w
hen you select a Sequence it becomes underlined.
The currently selected Sequence is always underlined.
Section 4
—
The Sequencer 85

ENSONIQ SQ-80 Specifications

General

Brand	ENSONIQ
Model	SQ-80
Category	Synthesizer
Language	English