Enterasys 800-Series Hardware Installation Guide A-1
A
Specifications
This appendix provides the following information:
Enterasys Networks reserves the right to change specifications at any time without notice.
Switch Specifications
Table A-1 provides the I/O ports, processors and memory, physical, and environmental
specifications for the Enterasys 800-Series models.
For information about... Refer to page...
Switch Specifications A-1
Redundant Power Supply Specifications A-6
Torque Values A-11
Pluggable Transceiver Specifications A-11
Console Port Pinout Assignments A-11
Regulatory Compliance A-11
Table A-1 Enterasys 800-Series Switch Specifications
Item Specification
08H20G4-24 Ports
10/100 Mbps Copper ports 1 through 24 Twenty-four 10/100 Mbps Copper ports with auto-sensing
and auto-negotiation via RJ45 connectors.
Combo 10/100/1000 Mbps Copper,
100/1000 Mbps SFP ports 25 and 26
Two Combo 10/100/1000 Mbps Copper, 100/1000 Mbps SFP
ports. When the Copper ports are in use, the SFP port slots
will be disabled.
100/1000 Mbps SFP ports 27 and 28 Two ports that support optional pluggable transceiver
1000BASE-SX, 1000BASE-LX fiber-optic, and 1000BASE-T
copper connections.
08H20G4-24P Ports
10/100 Mbps Copper PoE+ ports 1 through
24
Twenty-four 10/100 Mbps Copper PoE+ ports with
auto-sensing and auto-negotiation via RJ45 connectors.
Combo 10/100/1000 Mbps Copper,
100/1000 Mbps SFP ports 25 and 26
Two Combo 10/100/1000 Mbps Copper, 100/1000 Mbps SFP
ports. When the Copper ports are in use, the SFP port slots
will be disabled.
To Next Page
Loading...
