Entes MPR-45 - Safety and Warning Information; Safety Precautions; Electrical Safety Guidelines

3
SAFETY AND WARNINGS
Warning
Failure to follow the instructions below may result in serious injury or death.
 Cut all power before connecting the device.
 Once the device is energized, do not remove the front panel.
 Do not attempt to clean the device with a solvent or another similar agent. Use only a dry piece of
cloth.
 Check the correct connections before energizing the device.
 Contact your authorized seller in case of any problems with your device.
 Device is only for panel mounting.
 F Type fuse must be used and its current limit must be 1 A.
The manufacturing company is not responsible for the consequences resulting from failure to comply with
these precautions.
Safety
Read the entire user manual before using the device.
 A switch or circuit breaker must be connected between the network and the auxiliary supply of
the device.
 Connected switch or circuit breaker must be in close proximity to the device.
 Connected switch or circuit breaker must be marked as the disconnecting device for the
equipment.
Warranty
Device has a 2 (two) year warranty. Any repairs on the device must be done only by the manufacturer.
Otherwise, the device warranty will be void.