35
DST Mode Setting
1. Press the SET button while Clock DST Mode screen is displayed.
2. Daylight Save screen is displayed.
3. Press the SET button and select one of EUROPE, USA, MANUEL and DISABLE options.
4. If you select MANUEL option; you will have to enter month, week, day and hour for the start of DST in
that order.
5. After finishing the DST Start settings; you will have to enter month, week, day and hour for the end of
DST in that order.
6. After selecting your DST setting, press the SET menu and exit from this menu.
7. When exiting from the menu with the BACK or ESC button, don’t forget to save the changes.
RS-485 Communication Settings
RS-485 Address Setting
1. Select Address option under Settings/RS-485 and press SET button.
2. Current address option will start blinking. You can browse between digits with SET and BACK
buttons. Select an address between 1 and 247 and press SET button.
3. When exiting from the menu with the BACK or ESC button, don’t forget to save the changes.
RS-485 Baudrate Setting
RS-485 communication speed of the device can be set to one of the following options:
1. 2400 baud
2. 4800 baud
To Next Page
Loading...
