Epiroc SmartROC T35 Maintenance

SmartROC T35/T40 9 Feed Unit
45 No: 7026962571.1.7027002891 en-US
9.11 Check Rock Drill or Rotation Unit
n
Check and tighten all bolted joints.
n
Check and adjust the tension of the ropes.
n
Check all hoses for leakage.
n
Tighten and adjust the tension of the hoses if necessary.
n
Check and adjust the slide rail alignment on the feed beam.
9.12 Check Drill Rod Support
n
Check attachment and direction of the drill rod support attachment (A).
n
Check that the tightening torque of the drill rod support attachment (A).
n
Check that bolted joints (B) are properly tightened.
n
Check the slide pieces (C) for wear.
Component Tightening Torque
Drill rod support attachment 185 Nm (136 lbf.ft)

Epiroc SmartROC T35 Specifications

General

Brand	Epiroc
Model	SmartROC T35
Category	Industrial Equipment
Language	English