SmartROC T35/T40 9 Feed Unit
47 No: 7026962571.1.7027002891 en-US
7.
Install the new wire rope and install the scraper plate again.
8.
Adjust the wire ropes.
9.14 Disassembling Feed Cylinder
WARNING
High Hydraulic Oil Pressure
Working on the hydraulic system involves a high risk of personal injury.
u Make sure that the system is de-pressurized before starting any work.
WARNING
Hydraulic Oil and Water Pressure
Can cause personal injury.
u Do not replace high-pressure hoses with hoses of lower quality than the originals.
u Do not replace high-pressure hoses with hoses installed with removable couplings.
WARNING
Disassembling and Assembling Components
Can cause personal injury.
u Components that could move or fall down must be securely supported or strapped in
place during service and maintenance work.
WARNING
Heavy Objects
Can cause crushing injury or death.
u Do not stand under the heavy object being lifted.
u Use adequate lifting equipment.
WARNING
Moving Parts
Can cause personal injury.
u Shut off the machine and lock the battery isolation switch before starting any work.
u Make sure that the hydraulic pump is off and that the system is depressurized before
starting work.
To Next Page
Loading...
Need help?
General
