SmartROC T35/T40 12 Hydraulic System
61 No: 7026962571.1.7027002891 en-US
n
Inspect all hydraulic hoses and connections thoroughly. Any cracking or swelling indi-
cates an external or internal leak. Inspect the hose location and clips.
n
Inspect the hose casing. Any swelling indicates inner hose or cord breakage.
n
Inspect the hydraulic couplings for leaks, indentations, and adapters. The couplings
must be fastened securely if they have screw flanges. If there are any signs of leaks
around connections, replace the seals or the complete coupling.
n
Check that all hose retainers and clamps are intact.
n
Inspect all pressed couplings for signs of cracks or damage to compression sleeves.
Replace any defective hoses with new ones.
12.6 Check Mounting Hydraulic Jack
n
Check the mounting and torque on hydraulic jack (A).
To Next Page
Loading...
Need help?
General
