172
• Select from the contact list: Press the up arrow button to display the contact list. Use the up
arrow and OK buttons to select one or more contacts (select the contact again to deselect it), and
press the back button to close the contact list.
• Select from the sent fax history: Press the down arrow button to display the sent fax history.
Use the arrow and OK buttons to select a recipient from the list.
Note: To delete selected recipients, press the right arrow button. Select the recipients you want to
delete and press the OK button on each. When you are finished, press the back button.
5. If you need to change any fax settings, press the OK button and select Scan Settings or Fax Send
Settings and select your settings.
6. Press the start button to send the fax.
Note: To cancel faxing, press the stop button.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: If the fax number is busy or there is a problem, the product automatically redials after one minute.
While the product is sending a color fax, other features are unavailable.
Parent topic: Sending Faxes from the Product Control Panel
Fax Sending Options
While sending a fax, you can select Scan Settings and Fax Send Settings and select these options.
Scan Settings
Setting Options Description
Resolution Standard Adjusts the scan resolution and print quality of
outgoing faxes
Fine
Photo
Density Varying levels
available
Lets you select from various density levels
To Next Page
