Epson C11CK57201 - Preventing PC Connection Via USB

25
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST)
Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the
season. When you change from Winter to Summer, your product automatically sets its clock ahead
one hour. When you change from Summer to Winter, it sets its clock back one hour.
7. Select Date/Time and press the OK button.
8. Select the date format you want to use and press the OK button.
9. Use the arrow buttons and the numeric keypad to enter the current date, then press the OK button.
10. Select the time format you want to use and press the OK button.
11. Use the numeric keypad, arrow buttons and the reset button to enter the current time, then press
the OK button.
12. Select Time Difference and press the OK button.
13. Use the arrow buttons to enter the time difference between your time zone and UTC (Coordinated
Universal Time) and press the OK button.
Parent topic: Using the Control Panel
Preventing PC Connection via USB
You can disable access to your product from a USB-connected computer. This restricts non-network
access to the product.
1. Press the home button, if necessary.
2. Press the arrow buttons to select Settings, then press the OK button.
3. Press the arrow buttons to select Printer Setup and press the OK button.
4. Press the arrow buttons to select PC Connection via USB and press the OK button.
5. Select Disable and press the OK button.