-4
R4C4600
html.bk Rev.C
OPT.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
6. Hold the ribbon cartridge with the part where the ribbon is
exposed facing down and the ribbon-tightening knob facing
to the front of the printer. Then guide the ribbon under the
print head, and snap the cartridge into place so that the tabs
on both sides of the cartridge fit into the notches in the
cartridge holder.
7. Turn the ribbon-tightening knob again to remove any slack in
the ribbon so that the ribbon moves freely.
8. Close the paper bail and the printer cover.
To Next Page
Loading...
