-9
R4C4600
html.bk Rev.C
CONTR.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Auto tear-off
When auto tear-off is on and you are using continuous paper with
the tractor, the printer automatically advances the paper
perforation to the tear-off position, where you can easily tear off
the printed page(s). When the printer receives data again, it
automatically moves the paper back to the top-of-form position
and starts printing, so you can use all of the next page.
When auto tear-off is off and you are using continuous paper with
the tractor, you need to move the perforation to the tear-off
position manually by pressing the Tear Off/Special Paper
button. See “Using the tear-off function” for more information.
Auto line feed
When auto line feed is on, the printer accompanies each carriage
return (CR) code received with a line feed (LF) code.
Print direction
You can select auto print direction, bidirectional printing (Bi-D),
or unidirectional printing (Uni-D). Printing is normally
bidirectional; however, unidirectional printing allows for precise
vertical printing alignment.
Software
When you select ESC/P2, the printer operates in the EPSON
ESC/P2 mode. When you select IBM PPDS , the printer emulates
an IBM printer.
0 slash
Select the zero character with a slash () (this feature is on) or
without a slash (0) (This feature is off). The slash allows you to
easily distinguish between the uppercase letter “O” and a zero.
To Next Page
Loading...
