Epson DLQ-3500 - Loading Paper to the Cut-Sheet Feeder

-8
R4C4600
html.bk Rev.C
OPT.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
8. Turn on the printer and adjust the paper size in your software,
if necessary.
You are now ready to load paper to your cut-sheet feeder. To
remove the cut-sheet feeder, reverse the steps described above.
Loading paper to the cut-sheet feeder
For single-sheet multipart forms, use only the type of forms that
are glued at the top.
To avoid paper jams, do not allow too many printed sheets to be
stacked on the paper guide at one time. Remove the stack when
it is half as thick as the paper loading limit marked on the cut-sheet
feeder.
Follow these steps to load paper to the cut-sheet feeder:
1. Pull the paper set lever forward until the paper guides retract
to allow paper loading.