Epson DLQ-3500 - Overlapping Multipart Forms with Labels

-30
R4C4600
html.bk Rev.C
PAPER.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Overlapping multipart forms with labels
This kind of continuous paper is a combination of the two types
of forms; overlapping multipart forms and continuous forms with
labels. Be sure to follow any special instructions intended for
either type of forms.
c
Caution:
Use overlapping multipart forms with labels only under normal
operating conditions because labels are especially sensitive to
temperature and humidity.
Follow these steps to load overlapping multipart forms with
labels:
1. Make sure of the following:
❏ Your software settings keep the printing entirely within
the printable area. See “Printable area” for more
information.
❏ Tractor is selected as the paper source on the control
panel.
❏ The setting of the page length for tractor in the default
settings matches the page length of the form you use. See
“Changing default settings” for more information.
2. Turn on Overlapping Forms and Skip over perforation
settings in the default-setting mode.