-21
R4C4600
html.bk Rev.C
PAPER.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
After printing a sheet, the printer ejects it onto the paper guide
and the Paper Out and Pause lights come on. If you are printing
a multiple-page document, remove the printed sheet and insert a
new sheet into the paper guide. The printer automatically
advances the paper and resumes printing.
Note:
If the printer does not eject the printed sheet, press the Load/Eject
button.
Loading single sheets from the rear
You can load a stack of paper from the rear of the printer using
the optional cut-sheet feeder. See “Cut-Sheet Feeder” for more
information.
Loading Special Paper
Multipart forms
Your printer can print on both single-sheet and continuous
multipart forms. It can use multipart forms with up to eight parts
including the original.
c
Caution:
Use only carbonless multipart forms.
Before printing, set the paper-thickness lever to the appropriate
position for your multipart forms referring to the table in
“Adjusting the Paper-Thickness Lever”.
To Next Page
Loading...
