Epson DLQ-3500 - Adjusting the Printing Position

-18
R4C4600
html.bk Rev.C
OPT.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
1. inserted position
2. aligned position
3. arrow marks
Note:
Make sure to insert paper between the two arrow marks on the unit.
c
Caution:
Use the knob on the right side of the printer only to clear
paper jams when the printer is off.
4. The printer starts printing when it receives data. The printing
position (the position of the first letter of the first line) is set
to 3 mm (0.12 inch) from the left edge of the paper by default.
See “Adjusting the printing position” for more information
on the printing position.
A. 3 mm
* the printing position
5. The printer automatically ejects paper when it finishes
printing. If the printed sheet remains in the printer, press the
Load/Eject button to eject it.
Adjusting the printing position
You can choose among 26 patterns of the printing position for the
automatic sheet alignment unit. The patterns vary in 1.06 mm
(5/120-inch) increments.
Follow these steps to adjust the printing position: