Epson DLQ-3500 - Switching between Continuous Paper and Single Sheets

-34
R4C4600
html.bk Rev.C
PAPER.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
2. Make sure that Manual/CSF is selected as the paper source on
the control panel. If not, select it by pressing the Paper Source
button.
3. Select Card on the control panel by pressing the Tear
Off/Special Paper button.
4. Load cards following the instructions in “Loading single
sheets from the front”, “Loading paper to the cut-sheet
feeder”, or “Loading paper using the automatic sheet
alignment unit”.
from the paper guide
* guide mark
Switching Between Continuous Paper and
Single Sheets
When using the tractor, you can easily switch between continuous
paper and single sheets (including envelopes or postcards)
without removing the continuous paper from the tractor.