-1
R4C4600
html.bk Rev.C
TROUB.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Troubleshooting
Using the Error Indicators
You can identify many common printer problems using the lights
on the control panel. If your printer stops working and one or
more control panel lights are on or flashing or the printer beeps,
use the following table to diagnose and fix the problem. If you
cannot fix your printer problem using this table, see “Problems
and Solutions”.
State of panel
lights
Beep
pattern
Problem
Solution
Paper Out
Pause
••• No paper is loaded in the selected paper
source.
Load paper in the selected paper source;
the Paper Out and Pause lights go off and
the printer resumes printing.
Paper Out
Pause
••• Paper is not loaded correctly.
Remove and reload your paper correctly,
then press the Pause button. See “Loading
Continuous Paper ”, “Loading Single
Sheets”, or “Loading Special Paper ” for
paper-loading instructions.
••• Paper is jammed in the printer.
To clear the paper jam, see “Clearing a
Paper Jam”.
••• Paper is not fully ejected.
Press the Load/Eject button to eject the
sheet.