-16
R4C4600
html.bk Rev.C
OPT.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
5. Secure the cable to the port by tightening the two screws
attached to the connector.
c
Caution:
Make sure the printer is turned off before connecting the
cable.
Note:
To remove the automatic sheet alignment unit, turn off the printer
and follow the installing procedure in reverse from the last step.
Loading paper using the automatic sheet
alignment unit
Follow these steps to load paper using the automatic sheet
alignment unit:
1. Make sure that Manual/CSF is selected as the paper source on
the control panel. If not, select it by pressing the Paper Source
button.
To Next Page
Loading...
