-8
R4C4600
html.bk Rev.C
CONTR.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
* This setting is available only in IBM PPDS emulation mode.
**The options available for this setting vary depending on the country.
Page length for tractor
This setting allows you to set the page length (in inches) for the
continuous paper loaded on the tractor.
Skip over perforation
This feature is available only when continuous paper is selected
as the paper source. When you turn on this feature, the printer
provides a one-inch (25.4 mm) margin between the last line
printed on one page and the first line printed on the next page.
Because most application program margin settings override
margin settings from the control panel, you should use this setting
only if you cannot set your top and bottom margins using your
application.
International character
set for italic table**
Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark
1, Italic Sweden, Italic Italy,
Italic Spain 1
Font OCR-B, Orator, Orator-S, Script C,
Roman T, Sans Serif H
Manual feed wait time 0.5 second, 1 second, 1.5 seconds, 2
seconds
Buzzer Off, On
Overlapping Forms Off, On
Setting Options
To Next Page
Loading...
