Epson DLQ-3500 - Page 164

-22
R4C4600
html.bk Rev.C
APSPE.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
Overlapping multipart forms with labels
The specifications for the overlapping multipart forms with labels
are the same as those for labels except for the following items:
Area measurements
A 17 ± 3 mm (0.15 ± 0.12 inch)
B 13.3 mm (0.52 inch) or less
C from perforation to the top of the next overlapping form:
3.3 mm (0.13 inch) or more
D from perforation to the bottom edge of the glue point
area:
17 mm (0.67 inch) or less
E total thickness including glue point dilation:
0.7 mm (0.026 inch) or less