Epson DLQ-3500 - Page 21

-15
R4C4600
html.bk Rev.C
PAPER.FM A5 size
7/24/01
R
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
c
Caution:
Never use the tear-off function to feed continuous paper with
labels backward; they may come off their backing sheet and jam
the printer.
Using the Tear Off/Special Paper button
Follow these steps to advance continuous paper to the tear-off
position using the Tear Off/Special Paper button:
1. After the printer finishes printing your document, check that
the Tear Off/Special Paper lights are not flashing.
Note:
If the Tear Off/Special Paper lights are flashing, the paper is
in the tear-off position. If you press the Tear Off/Special Paper
button again, the printer feeds your paper to the next top-of-form
position.
2. Press the Tear Off/Special Paper button. The printer
advances the paper to the tear-off edge.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in “Adjusting the tear-off position”.
c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the top-of-form position.