-6
R4C4600
html.bk Rev.C
TROUB.FM A5 size
7/24/01
L
Proof Sign-off:
ABE Y. Azuma, Nagasawa
Takahashi
ABE S.Halvorson
The printer does not fully eject the paper.
Cause What to do
You may not be able to fully
eject your paper using the
LF/FF button.
Use the Load/Eject button to eject the
paper.
Your paper may be too long. Make sure the page length of your
paper is within the specified range. See
the single-sheet paper specifications in
“Single sheets”. Also check and adjust
the paper size setting in your
application or the printer driver.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause What to do
The printer has not fully
ejected your paper.
Remove the paper by hand; the Paper
Out light goes out. If you are printing
a multiple-page document, insert a
new sheet of paper into the paper
guide. The Pause light goes out and the
printer automatically loads the paper
and resumes printing.
To Next Page
Loading...
