c
Important:
Do not load plastic cards horizontally.
Note:
❏ Although the card has to be placed in the card slot at the front, you can only select ADF as the Document Source in
Epson Scan 2.
❏ When scanning starts, the card is taken into the scanner, protrudes slightly from the slot at the back, and then
returns through the scanner and is ejected from the card slot at the front. Do not touch the card until it is ejected.
Related Information
& “Basic Scanning” on page 52
& “Advanced Scanning” on page 63
User's Guide
Specications of Originals and Placing Originals
51
To Next Page
Loading...
