Epson DS-360W

Charging the Battery by Connecting to an AC Adapter
1. Connect the power cord to the AC adapter, connect the AC adapter to the scanner, and then plug in the power
cord.
Note:
❏ e battery charging light turns orange when the battery is charging. When charging is complete, the light turns blue
if the scanner is on, if the scanner is
o
the light turns
o.
❏ It takes approximately 3 hours to fully charge the battery.
Charging the Battery with a USB Connection
You can charge the battery from a computer with a USB connection.
1. Make sure that the computer is on. Wake the computer if it is in hibernate or sleep mode.
User's Guide
Using the Scanner on the Battery
22