Epson DS-360W

Network Settings
Network Connection Types
Wi-Fi Connection
Connect the scanner and the computer or smart device to the access point. is is the typical connection method
for home or oce networks where computers are connected by Wi-Fi through the access point.
Related Information
& “Connecting to a Computer” on page 82
& “Connecting to a Smart Device” on page 84
& “Making Wi-Fi Settings from the Control Panel” on page 84
AP Mode Connection
Use this connection method when you are not using Wi-Fi at home or at the oce, or when you want to connect
the scanner and the smart device directly. In this mode, the scanner acts as an access point and you can connect up
to four devices to the scanner without having to use a standard access point. However, devices directly connected
to the scanner cannot communicate with each other through the scanner.
User's Guide
Network Settings
81