Note:
AP mode is a connection method designed to replace Ad Hoc mode.
Related Information
& “Making AP Mode Settings” on page 93
& “Making AP Mode Settings Using Push Button” on page 95
Connecting to a Computer
We recommend using the installer to connect the scanner to a computer. You can run the installer using one of the
following methods.
❏ Setting up from the website
Access the following website, and then enter the product name.
http://epson.sn
Go to Setup, and then click Download in the download and connect part. Click or double-click the
downloaded le to run the installer. Follow the on-screen instructions.
❏ Setting up using the
soware
disc (only for the models that come with a
soware
disc and users with computers
with disc drives.)
Insert the
soware
disc into the computer, and then follow the on-screen instructions.
Selecting the Connection Methods
Follow the on-screen instructions until the following screen is displayed and then select the connection method of
the scanner to the computer.
User's Guide
Network Settings
82
To Next Page
Loading...
