Epson DS-360W

Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
& “Changing the Connection Method to a Computer” on page 97
Changing the Connection Method to a Computer
Using the installer and re-set up in a
dierent
connection method.
❏ Setting up from the website
Access the following website, and then enter the product name.
http://epson.sn
Go to Setup, and then click Download in the download and connect part. Click or double-click the
downloaded le to run the installer. Follow the on-screen instructions.
❏ Setting up using the
soware
disc (only for the models that come with a
soware
disc and users with computers
with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
❏ Wi n d o w s
Select Change or re-set the connection method on the Select Soware Installation screen, and then click Next.
User's Guide
Network Settings
97