4. Make the necessary settings for your Wi-Fi connection.
Item Settings
Communication Mode Set to Infrastructure
SSID
Set the SSID of the access point you want to connect to.
Security Level
Set the security level of your wireless connection.
WEP Settings
WPA Settings
Set the password of your wireless connection.
Note:
❏ Make additional settings if necessary.
❏ If you do not know the security settings for the access point, see the documentation provided with the access point or
contact your network administrator.
5. Click Transmit.
6. Quit EpsonNet Cong.
Click Device, and then click Quit.
User's Guide
Network Settings
91
To Next Page
Loading...
