Epson DS-570WII

❏ Example of connecting to dierent SSIDs
❏ Example of connecting to SSIDs with a dierent frequency range
A privacy separator on the wireless router is available.
Solutions
Most wireless routers have a privacy separator feature that blocks communication between connected
devices. If you cannot communicate between the scanner and the computer or smart device even if they
are connected to the same network, disable the privacy separator on the wireless router. See the manual
provided with the wireless router for details.
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the scanner is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Click Add on the Scanner Settings screen in Epson Scan 2 Utility. Select the model you are using, enter
the IP address, and then click OK.
Restart the wireless router or reset the network settings for the scanner.
Solving Problems > Problems Starting Scanning > Cannot Start Scanning from Computer
164