Epson DS-570WII

Conguring a Certicate for IPsec/IP Filtering
Congure the Client Certicate for IPsec/IP Filtering. When you set it, you can use the certicate as an
authentication method for IPsec/IP Filtering. If you want to
congure
the
certication
authority, go to CA
Certicate.
1.
Access Web Cong and then select the Network Security tab > IPsec/IP Filtering > Client Certicate.
2.
Import the certicate in Client Certicate.
If you have already imported a certicate published by a Certication Authority, you can copy the certicate
and use it in IPsec/IP Filtering. To copy, select the certicate from Copy From, and then click Copy.
Related Information
& “Running Web Cong on a Web Browser” on page 26
Connecting the Scanner to an IEEE802.1X Network
Conguring
an IEEE802.1X Network
When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1.
Access Web Cong and then select the Network Security tab > IEEE802.1X > Basic.
2.
Enter a value for each item.
If you want to use the scanner on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
3.
Click Next.
A
conrmation
message is displayed.
4.
Click OK.
e scanner is updated.
IEEE802.1X Network Setting Items
Items Settings and Explanation
IEEE802.1X (Wi-Fi) The connection status of IEEE802.1X (Wi-Fi) is displayed.
Connection Method The connection method of a current network is displayed.
Administrator Information > Advanced Security Settings > Connecting the Scanner to an IEEE802.1X Network
217