Epson DS-570WII

1.
Insert the
soware
disc into the computer, and then follow the on-screen instructions.
Note:
When the Select Your Operation screen is displayed, select the operation you want to perform. Select Set up Scanner
connection again (for new network router or changing USB to network, etc.) and click Next.
2.
On the Select Your Connection Method screen, select Advanced conguration, enter the static IP address,
and then follow the on-screen instructions.
Connecting to the Wireless LAN (Wi-Fi)
You can connect the scanner to the wireless LAN (Wi-Fi) in several ways. Choose the connection method that
matches the environment and conditions that you are using.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer
connecting the scanner to the network, connect to the scanner from the device that you want to use
(computer, smart device, tablet, and so on.)
Introduction of Product Security Features
is
section introduces the security function of the Epson Devices.
Name Feature type What to set What to prevent
Conguring the
Administrator
Password
Locks the system settings,
such as connection setup for
network.
An administrator sets a
password to the device.
You can set or change from
Web Cong.
Prevent from illegally reading
and changing the
information stored in the
device such as ID, password,
network settings, and so on.
Also, reduce a wide range of
security risks such as leakage
of information for the
network environment or
security policy.
Administrator Settings
Conguring the Administrator Password
When you set the administrator password, you can prevent the users from changing system management settings.
You can set and change the administrator password using either Web Cong or Epson Device Admin. When using
Epson Device Admin, see the Epson Device Admin guide or help.
Conguring the Administrator Password from a Computer
You can set the administrator password using Web Cong.
1.
Access Web
Cong
and select the Product Security tab > Change Administrator Password.
Administrator Information > Administrator Settings > Conguring the Administrator Password
189