Epson DS-570WII

Network Connection Types
You can use the following connection methods.
Wi-Fi Connection
Connect the scanner and the computer or smart device to the wireless router. is is the typical connection
method for home or oce networks where computers are connected by Wi-Fi through the wireless router.
AP Mode Connection
Use this connection method when you are not using Wi-Fi at home or at the oce, or when you want to connect
the scanner and the smart device directly. In this mode, the scanner acts as an access point and you can connect up
to four devices to the scanner without having to use a standard access point. However, devices directly connected
to the scanner cannot communicate with each other through the scanner.
Note:
AP mode is a connection method designed to replace Ad Hoc mode.
e
scanner can be connected by Wi-Fi and AP mode simultaneously. However, if you start a network connection
in AP mode when the scanner is connected by Wi-Fi, the Wi-Fi is temporarily disconnected.
Network Settings > Network Connection Types > AP Mode Connection
65