Epson DS-570WII

2.
Enter a password to New Password and
Conrm
New Password. Enter the user name, if necessary.
If you want to change the password to new one, enter a current password.
3.
Select OK.
Note:
❏ To set or change the locked menu items, click Administrator Login, and then enter the administrator password.
❏ To delete the administrator password, click Product Security tab > Delete Administrator Password, and then enter
the administrator password.
Related Information
& “Running Web Cong on a Web Browser” on page 26
Logging on to the Scanner from a Computer
When you log in to Web Cong as an administrator, you can operate items that are set in the Lock Setting.
1.
Enter the scanner's IP address into a browser to run Web Cong.
2.
Click Administrator Login.
3.
Enter the user name and administrator password in User Name and Current password.
4.
Click OK.
e
locked items and Administrator Logout are displayed when being authenticated.
Click Administrator Logout to log o.
Related Information
& “Running Web Cong on a Web Browser” on page 26
Monitoring a Remote Scanner
Checking Information for a Remote Scanner
You can check the following information of the operating scanner from Status by using Web
Cong
.
❏ Product Status
Check the status, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏ Usage Status
Check the
rst
day of scanning, scanning count, etc.
❏ Hardware Status
Check the status of each function of the scanner.
Administrator Information > Monitoring a Remote Scanner > Checking Information for a Remote Scanner
190