Epson DS-570WII

2.
Set the subject of email
notication.
Select the contents displayed on the subject from the two pull-down menus.
❏ e selected contents are displayed next to Subject.
❏ e same contents cannot be set on le and right.
❏ When the number of characters in Location exceeds 32 bytes, characters exceeding 32 bytes are omitted.
3.
Enter the email address for sending the notication email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
4.
Select the language for the email notications.
5.
Select the check box on the event for which you want to receive a notication.
e number of Notication Settings is linked to the destination number of Email Address Settings.
Example :
If you want to send a notication to the email address set for number 1 in Email Address Settings when the
admin password is changed, select the check box for column 1 on the line Administrator password changed.
6.
Click OK.
Conrm that an email notication will be sent by causing an event.
Example : e administrator password has been changed.
Related Information
& “Running Web Cong on a Web Browser” on page 26
Items for Email Notication
Items Settings and Explanation
Administrator password changed Notice when administrator password has been changed.
Scanner error Notice when the scanner error has occurred.
Wi-Fi failure Notice when the error of the wireless LAN interface has occurred.
Backing Up the Settings
You can export the setting value set from Web Cong to the le. You can use it for backing up the setting values,
replacing the scanner, etc.
e exported le cannot be edited because it is exported as a binary le.
Export the settings
Export the setting for the scanner.
Administrator Information > Backing Up the Settings > Export the settings
194